13-year testing machine manufacturer
Improve quality with cutting-edge technology, testing experts by your sideNews
-
022026-11
Drop Test Standards: ISTA 3A vs ASTM D52···
Three standards dominate carton drop testing, and they disagree on the details that matter most: drop height, the number of drops, and which faces are hit. Using the wrong one produces a report that l··· Learn more -
022026-11
Chamber Volume for IEC 60068-2-1 Tests
Buying a temperature chamber by volume alone is the most common specification mistake we see. The number on the datasheet describes the internal space — not the space your samples can actually occupy··· Learn more -
022026-11
UN38.3 T.4 & T.5: Crush and Impact Tests
UN38.3 is the transport-safety test series every lithium cell and battery pack must pass before it can fly. Two of its eight tests — T.4 crush and T.5 impact — are the ones most often failed on the ··· Learn more -
022026-11
From Raw Material to Finished Frame
Most of a testing machine is decided long before the control cabinet is wired: it is decided by how the frame and the moving parts are machined. A short walk through our machining floor.Frame and colu··· Learn more -
022026-11
Calibration Lab: Traceable Force Measure···
Force measurement is only as good as the chain behind it. We have upgraded the in-house calibration bench so that force readings are traceable to national standards rather than to a factory-transfer v··· Learn more -
022026-11
Inside the Assembly & Commissioning Shop
Every machine leaves our Dongguan plant only after it has been assembled, wired and actually run with a specimen on it. This is what that stage looks like.AssemblyFrames are squared and welded on the ··· Learn more

